Re: ingame lagg with mpower z77
kombuster is running.what should i test?3d test,gpu,kmark?
View ArticleRe: 7850 2GB Twin Frozr III HDMI Audio?
the CCC suite does have it internally from somewhere around 11.1 onwards but its very twitchy when it installs as its doing so many componants at once that it usually will not put the HDMI audio into...
View ArticleRe: 7850 2GB Twin Frozr III HDMI Audio?
Quote from: badboy2k on Today at 15:12:33the CCC suite does have it internally from somewhere around 11.1 onwards but its very twitchy when it installs as its doing so many componants at once that it...
View ArticleRe: Looking for MSI Control Center Tutorial for overclocking i7 2600K
Thank you very much again Bernhard.I'll use your recommendations.
View ArticleClik here to view.
Re: X79A GD45 Slow start and slow boot into windows with SSD
Uploaded with ImageShack.usThe initial booting has improved since the bios u...
View ArticleRe: 7950 Twin Frozr III running too hot/too loud
I just hit 75° C but this seems to be OK then. I will use afterburner to reduce the speeds and see what the temperature does. What temperatures are considered worrisome and critical for this card?...
View ArticleRe: 7950 Twin Frozr III running too hot/too loud
Anything below 90°C is nothing to worry about in any way. Replacing TIM is ok as long as you don't damage anything doing that.
View ArticleRe: Voltage Offset for All high end msi boards
Please don't post in all caps as that is considered shouting. >>Please read and comply with the Forum Rules.<<
View ArticleRe: MSI Z77A GD65 Bios Issues!
i have tested each card they were running perfectly fine ran 3dmark 11 and played mw3 and metro2033 on thembut then i reset my overclocked values to default n since then i am geting all sorts of...
View ArticleRe: Can`t get crossfire to work
I understand too little to verify anything but with just X4 on one slot and no CF Bridge I can't believe that this works. Also seems the guy on the other forum has trouble himself.So for trying you...
View ArticleR: Z77 Mpower PCI LANE problem [MSI 7751]
thanks for the quick reply... what do you mean by standoff??? i've double checked and checked the cpu pins and none of them are bent...if i can solve the standoff thing i'll be happy if not i'll turn...
View ArticleRe: Z77 Mpower PCI LANE problem [MSI 7751]
Remove the board and make sure there are no extra stand off or screws shorting the case.Also, while it is out re-check the cpu pins with a bight light and magnifying glass. Then rebuild outside of the...
View ArticleRe: Overclocking a 2500k
Quote from: doubleohseven on Today at 03:10:27Well fellas, looks like we hit the nail on the head. Just finished 40 passes of IBT at 'maximum' with 1.385v @4.5. 1.380v failed though. So, my 2500k still...
View ArticleMOVED: msi afterburner underclocking my gpu
This topic has been moved to MSI Video Cards.http://forum-en.msi.com/index.php?topic=162667.0
View ArticleR: Re: Z77 Mpower PCI LANE problem [MSI 7751]
Quote from: xmad on Today at 04:19:28Remove the board and make sure there are no extra stand off or screws shorting the case.Also, while it is out re-check the cpu pins with a bight light and...
View ArticleRe: 560ti TF2 1g OC possible issues
Cool Masters Haf-X case, all stock fans that came with the case. 200mm x3; Front intake, Side intake, Top exhaust. 140mm Rear exhaust. I tested with SLI disabled with 83-86C. I assume if I removed...
View ArticleRe: 760GM-E51(FX) & Vishera
It will be supported with a BIOS update which contains the new microcode.
View ArticleRe: Did MSI alter Vcore settings with Z68A-GD55 (B3) BIOS 25.6 update?
A forum moderator will probably be along to provide a reversal procedure for you to go back to a Sandy UEFI/BIOS again.I don't have the needed special .rar or .zip BIOS file, or I could have helped...
View ArticleRe: Can`t get crossfire to work
Why do you say it makes no point first i had 2695 and now 5000 something thats almost double the points i get a steady fps on borderlands 2 (thats teh only game he installed )where i had fps drops on...
View ArticleRe: Enthusiast Graphics Workstation.
I don't see it listed either. Looks like all the Xeon's need the very newest UEFI/BIOS as well, v16, which I doubt most of the mainboards in reseller inventories have installed. In that situation, a...
View Article